From 7e2c421ef88e9da9c39e01496b7f5b0b354b42bc Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 19 Jun 2025 09:34:13 +0800 Subject: [PATCH 01/21] usb: cdnsp: do not disable slot for disabled slot It doesn't need to do it, and the related command event returns 'Slot Not Enabled Error' status. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable Suggested-by: Hongliang Yang Reviewed-by: Fugang Duan Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20250619013413.35817-1-peter.chen@cixtech.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdnsp-ring.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index fd06cb85c4ea..757fdd918286 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -772,7 +772,9 @@ static int cdnsp_update_port_id(struct cdnsp_device *pdev, u32 port_id) } if (port_id != old_port) { - cdnsp_disable_slot(pdev); + if (pdev->slot_id) + cdnsp_disable_slot(pdev); + pdev->active_port = port; cdnsp_enable_slot(pdev); } From 630a1dec3b0eba2a695b9063f1c205d585cbfec9 Mon Sep 17 00:00:00 2001 From: Kuen-Han Tsai Date: Wed, 28 May 2025 18:03:11 +0800 Subject: [PATCH 02/21] usb: dwc3: Abort suspend on soft disconnect failure When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps going with the suspend, resulting in a period where the power domain is off, but the gadget driver remains connected. Within this time frame, invoking vbus_event_work() will cause an error as it attempts to access DWC3 registers for endpoint disabling after the power domain has been completely shut down. Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the controller and proceeds with a soft connect. Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") Cc: stable Acked-by: Thinh Nguyen Signed-off-by: Kuen-Han Tsai Link: https://lore.kernel.org/r/20250528100315.2162699-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 9 +++++++-- drivers/usb/dwc3/gadget.c | 22 +++++++++------------- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 2bc775a747f2..8002c23a5a02 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2422,6 +2422,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { u32 reg; int i; + int ret; if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) { dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & @@ -2440,7 +2441,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) case DWC3_GCTL_PRTCAP_DEVICE: if (pm_runtime_suspended(dwc->dev)) break; - dwc3_gadget_suspend(dwc); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; synchronize_irq(dwc->irq_gadget); dwc3_core_exit(dwc); break; @@ -2475,7 +2478,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) break; if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) { - dwc3_gadget_suspend(dwc); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; synchronize_irq(dwc->irq_gadget); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 321361288935..b6b63b530148 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4821,8 +4821,15 @@ int dwc3_gadget_suspend(struct dwc3 *dwc) int ret; ret = dwc3_gadget_soft_disconnect(dwc); - if (ret) - goto err; + /* + * Attempt to reset the controller's state. Likely no + * communication can be established until the host + * performs a port reset. + */ + if (ret && dwc->softconnect) { + dwc3_gadget_soft_connect(dwc); + return -EAGAIN; + } spin_lock_irqsave(&dwc->lock, flags); if (dwc->gadget_driver) @@ -4830,17 +4837,6 @@ int dwc3_gadget_suspend(struct dwc3 *dwc) spin_unlock_irqrestore(&dwc->lock, flags); return 0; - -err: - /* - * Attempt to reset the controller's state. Likely no - * communication can be established until the host - * performs a port reset. - */ - if (dwc->softconnect) - dwc3_gadget_soft_connect(dwc); - - return ret; } int dwc3_gadget_resume(struct dwc3 *dwc) From cee4392a57e14a799fbdee193bc4c0de65b29521 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 5 Jun 2025 14:28:45 +0200 Subject: [PATCH 03/21] Logitech C-270 even more broken Some varieties of this device don't work with RESET_RESUME alone. Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20250605122852.1440382-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 53d68d20fb62..0cf94c7a2c9c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -227,7 +227,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech HD Webcam C270 */ - { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME | + USB_QUIRK_NO_LPM}, /* Logitech HD Pro Webcams C920, C920-C, C922, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, From 8f5b7e2bec1c36578fdaa74a6951833541103e27 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 11 Jun 2025 14:24:41 +0300 Subject: [PATCH 04/21] usb: hub: fix detection of high tier USB3 devices behind suspended hubs USB3 devices connected behind several external suspended hubs may not be detected when plugged in due to aggressive hub runtime pm suspend. The hub driver immediately runtime-suspends hubs if there are no active children or port activity. There is a delay between the wake signal causing hub resume, and driver visible port activity on the hub downstream facing ports. Most of the LFPS handshake, resume signaling and link training done on the downstream ports is not visible to the hub driver until completed, when device then will appear fully enabled and running on the port. This delay between wake signal and detectable port change is even more significant with chained suspended hubs where the wake signal will propagate upstream first. Suspended hubs will only start resuming downstream ports after upstream facing port resumes. The hub driver may resume a USB3 hub, read status of all ports, not yet see any activity, and runtime suspend back the hub before any port activity is visible. This exact case was seen when conncting USB3 devices to a suspended Thunderbolt dock. USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating USB3 devices expect to be resumed within 100ms after signaling wake. if not then device will resend the wake signal. Give the USB3 hubs twice this time (200ms) to detect any port changes after resume, before allowing hub to runtime suspend again. Cc: stable Fixes: 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.") Acked-by: Alan Stern Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250611112441.2267883-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 770d1e91183c..5c12dfdef569 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -68,6 +68,12 @@ */ #define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT 500 /* ms */ +/* + * Give SS hubs 200ms time after wake to train downstream links before + * assuming no port activity and allowing hub to runtime suspend back. + */ +#define USB_SS_PORT_U0_WAKE_TIME 200 /* ms */ + /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ @@ -1068,11 +1074,12 @@ int usb_remove_device(struct usb_device *udev) enum hub_activation_type { HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */ - HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, + HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, HUB_POST_RESUME, }; static void hub_init_func2(struct work_struct *ws); static void hub_init_func3(struct work_struct *ws); +static void hub_post_resume(struct work_struct *ws); static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) { @@ -1095,6 +1102,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) goto init2; goto init3; } + + if (type == HUB_POST_RESUME) { + usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + hub_put(hub); + return; + } + hub_get(hub); /* The superspeed hub except for root hub has to use Hub Depth @@ -1343,6 +1357,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) device_unlock(&hdev->dev); } + if (type == HUB_RESUME && hub_is_superspeed(hub->hdev)) { + /* give usb3 downstream links training time after hub resume */ + INIT_DELAYED_WORK(&hub->init_work, hub_post_resume); + queue_delayed_work(system_power_efficient_wq, &hub->init_work, + msecs_to_jiffies(USB_SS_PORT_U0_WAKE_TIME)); + usb_autopm_get_interface_no_resume( + to_usb_interface(hub->intfdev)); + return; + } + hub_put(hub); } @@ -1361,6 +1385,13 @@ static void hub_init_func3(struct work_struct *ws) hub_activate(hub, HUB_INIT3); } +static void hub_post_resume(struct work_struct *ws) +{ + struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work); + + hub_activate(hub, HUB_POST_RESUME); +} + enum hub_quiescing_type { HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND }; From 3b18405763c1ebb1efc15feef5563c9cdb2cc3a7 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 11 Jun 2025 14:14:15 +0300 Subject: [PATCH 05/21] usb: acpi: fix device link removal The device link to the USB4 host interface has to be removed manually since it's no longer auto removed. Fixes: 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links") Cc: stable Signed-off-by: Heikki Krogerus Reviewed-by: Mika Westerberg Link: https://lore.kernel.org/r/20250611111415.2707865-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 +++ drivers/usb/core/usb-acpi.c | 4 +++- include/linux/usb.h | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5c12dfdef569..6bb6e92cb0a4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2368,6 +2368,9 @@ void usb_disconnect(struct usb_device **pdev) usb_remove_ep_devs(&udev->ep0); usb_unlock_device(udev); + if (udev->usb4_link) + device_link_del(udev->usb4_link); + /* Unregister the device. The device driver is responsible * for de-configuring the device and invoking the remove-device * notifier chain (used by usbfs and possibly others). diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index ea1ce8beb0cb..489dbdc96f94 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); */ static int usb_acpi_add_usb4_devlink(struct usb_device *udev) { - const struct device_link *link; + struct device_link *link; struct usb_port *port_dev; struct usb_hub *hub; @@ -188,6 +188,8 @@ static int usb_acpi_add_usb4_devlink(struct usb_device *udev) dev_dbg(&port_dev->dev, "Created device link from %s to %s\n", dev_name(&port_dev->child->dev), dev_name(nhi_fwnode->dev)); + udev->usb4_link = link; + return 0; } diff --git a/include/linux/usb.h b/include/linux/usb.h index 1b2545b4363b..92c752f5446f 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -614,6 +614,7 @@ struct usb3_lpm_parameters { * FIXME -- complete doc * @authenticated: Crypto authentication passed * @tunnel_mode: Connection native or tunneled over USB4 + * @usb4_link: device link to the USB4 host interface * @lpm_capable: device supports LPM * @lpm_devinit_allow: Allow USB3 device initiated LPM, exit latency is in range * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM @@ -724,6 +725,7 @@ struct usb_device { unsigned reset_resume:1; unsigned port_is_suspended:1; enum usb_link_tunnel_mode tunnel_mode; + struct device_link *usb4_link; int slot_id; struct usb2_lpm_parameters l1_params; From 31a6afbe86e8e9deba9ab53876ec49eafc7fd901 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Sat, 14 Jun 2025 20:49:14 +0800 Subject: [PATCH 06/21] usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability. Reported-by: Shawn Guo Reported-by: John Ernberg Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/ Tested-by: John Ernberg # iMX8QXP Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller") Cc: stable Reviewed-by: Jun Li Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/udc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 8a9b31fd5c89..1a48e6440e6c 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -2374,6 +2374,10 @@ static void udc_suspend(struct ci_hdrc *ci) */ if (hw_read(ci, OP_ENDPTLISTADDR, ~0) == 0) hw_write(ci, OP_ENDPTLISTADDR, ~0, ~0); + + if (ci->gadget.connected && + (!ci->suspended || !device_may_wakeup(ci->dev))) + usb_gadget_disconnect(&ci->gadget); } static void udc_resume(struct ci_hdrc *ci, bool power_lost) @@ -2384,6 +2388,9 @@ static void udc_resume(struct ci_hdrc *ci, bool power_lost) OTGSC_BSVIS | OTGSC_BSVIE); if (ci->vbus_active) usb_gadget_vbus_disconnect(&ci->gadget); + } else if (ci->vbus_active && ci->driver && + !ci->gadget.connected) { + usb_gadget_connect(&ci->gadget); } /* Restore value 0 if it was set for power lost check */ From f6c7bc4a6823a0a959f40866a1efe99bd03c2c5b Mon Sep 17 00:00:00 2001 From: Kuen-Han Tsai Date: Tue, 17 Jun 2025 13:07:11 +0800 Subject: [PATCH 07/21] Revert "usb: gadget: u_serial: Add null pointer check in gs_start_io" This reverts commit ffd603f214237e250271162a5b325c6199a65382. Commit ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in gs_start_io") adds null pointer checks at the beginning of the gs_start_io() function to prevent a null pointer dereference. However, these checks are redundant because the function's comment already requires callers to hold the port_lock and ensure port.tty and port_usb are not null. All existing callers already follow these rules. The true cause of the null pointer dereference is a race condition. When gs_start_io() calls either gs_start_rx() or gs_start_tx(), the port_lock is temporarily released for usb_ep_queue(). This allows port.tty and port_usb to be cleared. Fixes: ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in gs_start_io") Cc: stable Signed-off-by: Kuen-Han Tsai Reviewed-by: Prashanth K Link: https://lore.kernel.org/r/20250617050844.1848232-1-khtsai@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/u_serial.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index ab544f6824be..c043bdc30d8a 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -544,20 +544,16 @@ static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head, static int gs_start_io(struct gs_port *port) { struct list_head *head = &port->read_pool; - struct usb_ep *ep; + struct usb_ep *ep = port->port_usb->out; int status; unsigned started; - if (!port->port_usb || !port->port.tty) - return -EIO; - /* Allocate RX and TX I/O buffers. We can't easily do this much * earlier (with GFP_KERNEL) because the requests are coupled to * endpoints, as are the packet sizes we'll be using. Different * configurations may use different endpoints with a given port; * and high speed vs full speed changes packet sizes too. */ - ep = port->port_usb->out; status = gs_alloc_requests(ep, head, gs_read_complete, &port->read_allocated); if (status) From c529c3730bd09115684644e26bf01ecbd7e2c2c9 Mon Sep 17 00:00:00 2001 From: Kuen-Han Tsai Date: Tue, 17 Jun 2025 13:07:12 +0800 Subject: [PATCH 08/21] usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE Fixes: 35f95fd7f234 ("TTY: usb/u_serial, use tty from tty_port") Cc: stable Signed-off-by: Kuen-Han Tsai Reviewed-by: Prashanth K Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/ Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/u_serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index c043bdc30d8a..540dc5ab96fc 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -295,8 +295,8 @@ __acquires(&port->port_lock) break; } - if (do_tty_wake && port->port.tty) - tty_wakeup(port->port.tty); + if (do_tty_wake) + tty_port_tty_wakeup(&port->port); return status; } @@ -574,7 +574,7 @@ static int gs_start_io(struct gs_port *port) gs_start_tx(port); /* Unblock any pending writes into our circular buffer, in case * we didn't in gs_start_tx() */ - tty_wakeup(port->port.tty); + tty_port_tty_wakeup(&port->port); } else { /* Free reqs only if we are still connected */ if (port->port_usb) { From 3eff494f6e17abf932699483f133a708ac0355dc Mon Sep 17 00:00:00 2001 From: Roy Luo Date: Thu, 22 May 2025 19:09:11 +0000 Subject: [PATCH 09/21] usb: xhci: Skip xhci_reset in xhci_resume if xhci is being removed xhci_reset() currently returns -ENODEV if XHCI_STATE_REMOVING is set, without completing the xhci handshake, unless the reset completes exceptionally quickly. This behavior causes a regression on Synopsys DWC3 USB controllers with dual-role capabilities. Specifically, when a DWC3 controller exits host mode and removes xhci while a reset is still in progress, and then attempts to configure its hardware for device mode, the ongoing, incomplete reset leads to critical register access issues. All register reads return zero, not just within the xHCI register space (which might be expected during a reset), but across the entire DWC3 IP block. This patch addresses the issue by preventing xhci_reset() from being called in xhci_resume() and bailing out early in the reinit flow when XHCI_STATE_REMOVING is set. Cc: stable Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper") Suggested-by: Mathias Nyman Signed-off-by: Roy Luo Link: https://lore.kernel.org/r/20250522190912.457583-2-royluo@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 4e6dbd2375c3..4637d026716a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1182,7 +1182,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool power_lost, bool is_auto_resume) xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); xhci_zero_64b_regs(xhci); - retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC); + if (xhci->xhc_state & XHCI_STATE_REMOVING) + retval = -ENODEV; + else + retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC); spin_unlock_irq(&xhci->lock); if (retval) return retval; From 7aed15379db9c6ec67999cdaf5c443b7be06ea73 Mon Sep 17 00:00:00 2001 From: Roy Luo Date: Thu, 22 May 2025 19:09:12 +0000 Subject: [PATCH 10/21] Revert "usb: xhci: Implement xhci_handshake_check_state() helper" This reverts commit 6ccb83d6c4972ebe6ae49de5eba051de3638362c. Commit 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper") was introduced to workaround watchdog timeout issues on some platforms, allowing xhci_reset() to bail out early without waiting for the reset to complete. Skipping the xhci handshake during a reset is a dangerous move. The xhci specification explicitly states that certain registers cannot be accessed during reset in section 5.4.1 USB Command Register (USBCMD), Host Controller Reset (HCRST) field: "This bit is cleared to '0' by the Host Controller when the reset process is complete. Software cannot terminate the reset process early by writinga '0' to this bit and shall not write any xHC Operational or Runtime registers until while HCRST is '1'." This behavior causes a regression on SNPS DWC3 USB controller with dual-role capability. When the DWC3 controller exits host mode and removes xhci while a reset is still in progress, and then tries to configure its hardware for device mode, the ongoing reset leads to register access issues; specifically, all register reads returns 0. These issues extend beyond the xhci register space (which is expected during a reset) and affect the entire DWC3 IP block, causing the DWC3 device mode to malfunction. Cc: stable Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper") Signed-off-by: Roy Luo Link: https://lore.kernel.org/r/20250522190912.457583-3-royluo@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 5 ++--- drivers/usb/host/xhci.c | 26 +------------------------- drivers/usb/host/xhci.h | 2 -- 3 files changed, 3 insertions(+), 30 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e038ad3375dc..94c9c9271658 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -518,9 +518,8 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) * In the future we should distinguish between -ENODEV and -ETIMEDOUT * and try to recover a -ETIMEDOUT with a host controller reset. */ - ret = xhci_handshake_check_state(xhci, &xhci->op_regs->cmd_ring, - CMD_RING_RUNNING, 0, 5 * 1000 * 1000, - XHCI_STATE_REMOVING); + ret = xhci_handshake(&xhci->op_regs->cmd_ring, + CMD_RING_RUNNING, 0, 5 * 1000 * 1000); if (ret < 0) { xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret); xhci_halt(xhci); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 4637d026716a..8a819e853288 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -84,29 +84,6 @@ int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us) return ret; } -/* - * xhci_handshake_check_state - same as xhci_handshake but takes an additional - * exit_state parameter, and bails out with an error immediately when xhc_state - * has exit_state flag set. - */ -int xhci_handshake_check_state(struct xhci_hcd *xhci, void __iomem *ptr, - u32 mask, u32 done, int usec, unsigned int exit_state) -{ - u32 result; - int ret; - - ret = readl_poll_timeout_atomic(ptr, result, - (result & mask) == done || - result == U32_MAX || - xhci->xhc_state & exit_state, - 1, usec); - - if (result == U32_MAX || xhci->xhc_state & exit_state) - return -ENODEV; - - return ret; -} - /* * Disable interrupts and begin the xHCI halting process. */ @@ -227,8 +204,7 @@ int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us) if (xhci->quirks & XHCI_INTEL_HOST) udelay(1000); - ret = xhci_handshake_check_state(xhci, &xhci->op_regs->command, - CMD_RESET, 0, timeout_us, XHCI_STATE_REMOVING); + ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us); if (ret) return ret; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 49887a303e43..fa1ea0e0c7fb 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1868,8 +1868,6 @@ void xhci_skip_sec_intr_events(struct xhci_hcd *xhci, /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us); -int xhci_handshake_check_state(struct xhci_hcd *xhci, void __iomem *ptr, - u32 mask, u32 done, int usec, unsigned int exit_state); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_start(struct xhci_hcd *xhci); From bec15191d52300defa282e3fd83820f69e447116 Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Wed, 18 Jun 2025 23:06:04 +0000 Subject: [PATCH 11/21] usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS. tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer. Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail. Turn VBUS on before tcpm_set_roles to meet timing requirement. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable Signed-off-by: RD Babiera Reviewed-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20250618230606.3272497-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 1a1f9e1f8e4e..1f6fdfaa34bf 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4410,17 +4410,6 @@ static int tcpm_src_attach(struct tcpm_port *port) tcpm_enable_auto_vbus_discharge(port, true); - ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, - TYPEC_SOURCE, tcpm_data_role_for_source(port)); - if (ret < 0) - return ret; - - if (port->pd_supported) { - ret = port->tcpc->set_pd_rx(port->tcpc, true); - if (ret < 0) - goto out_disable_mux; - } - /* * USB Type-C specification, version 1.2, * chapter 4.5.2.2.8.1 (Attached.SRC Requirements) @@ -4430,13 +4419,24 @@ static int tcpm_src_attach(struct tcpm_port *port) (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) { ret = tcpm_set_vconn(port, true); if (ret < 0) - goto out_disable_pd; + return ret; } ret = tcpm_set_vbus(port, true); if (ret < 0) goto out_disable_vconn; + ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, TYPEC_SOURCE, + tcpm_data_role_for_source(port)); + if (ret < 0) + goto out_disable_vbus; + + if (port->pd_supported) { + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) + goto out_disable_mux; + } + port->pd_capable = false; port->partner = NULL; @@ -4447,14 +4447,14 @@ static int tcpm_src_attach(struct tcpm_port *port) return 0; -out_disable_vconn: - tcpm_set_vconn(port, false); -out_disable_pd: - if (port->pd_supported) - port->tcpc->set_pd_rx(port->tcpc, false); out_disable_mux: tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, TYPEC_ORIENTATION_NONE); +out_disable_vbus: + tcpm_set_vbus(port, false); +out_disable_vconn: + tcpm_set_vconn(port, false); + return ret; } From 2831a81077f5162f104ba5a97a7d886eb371c21c Mon Sep 17 00:00:00 2001 From: Pawel Laszczak Date: Fri, 20 Jun 2025 08:23:12 +0000 Subject: [PATCH 12/21] usb: cdnsp: Fix issue with CV Bad Descriptor test The SSP2 controller has extra endpoint state preserve bit (ESP) which setting causes that endpoint state will be preserved during Halt Endpoint command. It is used only for EP0. Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test" failed. Setting this bit doesn't have any impact for SSP controller. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable Signed-off-by: Pawel Laszczak Acked-by: Peter Chen Link: https://lore.kernel.org/r/PH7PR07MB95382CCD50549DABAEFD6156DD7CA@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/cdns3/cdnsp-debug.h | 5 +++-- drivers/usb/cdns3/cdnsp-ep0.c | 18 +++++++++++++++--- drivers/usb/cdns3/cdnsp-gadget.h | 6 ++++++ drivers/usb/cdns3/cdnsp-ring.c | 3 ++- 4 files changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h index cd138acdcce1..86860686d836 100644 --- a/drivers/usb/cdns3/cdnsp-debug.h +++ b/drivers/usb/cdns3/cdnsp-debug.h @@ -327,12 +327,13 @@ static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0, case TRB_RESET_EP: case TRB_HALT_ENDPOINT: ret = scnprintf(str, size, - "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c", + "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c %c", cdnsp_trb_type_string(type), ep_num, ep_id % 2 ? "out" : "in", TRB_TO_EP_INDEX(field3), field1, field0, TRB_TO_SLOT_ID(field3), - field3 & TRB_CYCLE ? 'C' : 'c'); + field3 & TRB_CYCLE ? 'C' : 'c', + field3 & TRB_ESP ? 'P' : 'p'); break; case TRB_STOP_RING: ret = scnprintf(str, size, diff --git a/drivers/usb/cdns3/cdnsp-ep0.c b/drivers/usb/cdns3/cdnsp-ep0.c index f317d3c84781..5cd9b898ce97 100644 --- a/drivers/usb/cdns3/cdnsp-ep0.c +++ b/drivers/usb/cdns3/cdnsp-ep0.c @@ -414,6 +414,7 @@ static int cdnsp_ep0_std_request(struct cdnsp_device *pdev, void cdnsp_setup_analyze(struct cdnsp_device *pdev) { struct usb_ctrlrequest *ctrl = &pdev->setup; + struct cdnsp_ep *pep; int ret = -EINVAL; u16 len; @@ -427,10 +428,21 @@ void cdnsp_setup_analyze(struct cdnsp_device *pdev) goto out; } + pep = &pdev->eps[0]; + /* Restore the ep0 to Stopped/Running state. */ - if (pdev->eps[0].ep_state & EP_HALTED) { - trace_cdnsp_ep0_halted("Restore to normal state"); - cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0); + if (pep->ep_state & EP_HALTED) { + if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_HALTED) + cdnsp_halt_endpoint(pdev, pep, 0); + + /* + * Halt Endpoint Command for SSP2 for ep0 preserve current + * endpoint state and driver has to synchronize the + * software endpoint state with endpoint output context + * state. + */ + pep->ep_state &= ~EP_HALTED; + pep->ep_state |= EP_STOPPED; } /* diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h index 2afa3e558f85..a91cca509db0 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.h +++ b/drivers/usb/cdns3/cdnsp-gadget.h @@ -987,6 +987,12 @@ enum cdnsp_setup_dev { #define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16)) #define SCT_FOR_TRB(p) (((p) << 1) & 0x7) +/* + * Halt Endpoint Command TRB field. + * The ESP bit only exists in the SSP2 controller. + */ +#define TRB_ESP BIT(9) + /* Link TRB specific fields. */ #define TRB_TC BIT(1) diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index 757fdd918286..0758f171f73e 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -2485,7 +2485,8 @@ void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index) { cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_HALT_ENDPOINT) | SLOT_ID_FOR_TRB(pdev->slot_id) | - EP_ID_FOR_TRB(ep_index)); + EP_ID_FOR_TRB(ep_index) | + (!ep_index ? TRB_ESP : 0)); } void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num) From af4db5a35a4ef7a68046883bfd12468007db38f1 Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Wed, 18 Jun 2025 22:49:42 +0000 Subject: [PATCH 13/21] usb: typec: altmodes/displayport: do not index invalid pin_assignments A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable Signed-off-by: RD Babiera Reviewed-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/altmodes/displayport.c | 2 +- include/linux/usb/typec_dp.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index b09b58d7311d..773786129dfb 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -677,7 +677,7 @@ static ssize_t pin_assignment_show(struct device *dev, assignments = get_current_pin_assignments(dp); - for (i = 0; assignments; assignments >>= 1, i++) { + for (i = 0; assignments && i < DP_PIN_ASSIGN_MAX; assignments >>= 1, i++) { if (assignments & 1) { if (i == cur) len += sprintf(buf + len, "[%s] ", diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h index f2da264d9c14..acb0ad03bdac 100644 --- a/include/linux/usb/typec_dp.h +++ b/include/linux/usb/typec_dp.h @@ -57,6 +57,7 @@ enum { DP_PIN_ASSIGN_D, DP_PIN_ASSIGN_E, DP_PIN_ASSIGN_F, /* Not supported after v1.0b */ + DP_PIN_ASSIGN_MAX, }; /* DisplayPort alt mode specific commands */ From 099cf1fbb8afc3771f408109f62bdec66f85160e Mon Sep 17 00:00:00 2001 From: Andrei Kuchynski Date: Tue, 24 Jun 2025 13:32:46 +0000 Subject: [PATCH 14/21] usb: typec: displayport: Fix potential deadlock The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context. Cc: stable Fixes: b4b38ffb38c9 ("usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode") Signed-off-by: Andrei Kuchynski Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20250624133246.3936737-1-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/altmodes/displayport.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 773786129dfb..d8b906ec4d1c 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -394,8 +394,7 @@ static int dp_altmode_vdm(struct typec_altmode *alt, case CMDT_RSP_NAK: switch (cmd) { case DP_CMD_STATUS_UPDATE: - if (typec_altmode_exit(alt)) - dev_err(&dp->alt->dev, "Exit Mode Failed!\n"); + dp->state = DP_STATE_EXIT; break; case DP_CMD_CONFIGURE: dp->data.conf = 0; From a49e1e2e785fb3621f2d748581881b23a364998a Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 26 Jun 2025 16:01:02 +0300 Subject: [PATCH 15/21] usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm Delayed work to prevent USB3 hubs from runtime-suspending immediately after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs"). This delayed work needs be flushed if system suspends, or hub needs to be quiesced for other reasons right after resume. Not flushing it triggered issues on QC SC8280XP CRD board during suspend/resume testing. Fix it by flushing the delayed resume work in hub_quiesce() The delayed work item that allow hub runtime suspend is also scheduled just before calling autopm get. Alan pointed out there is a small risk that work is run before autopm get, which would call autopm put before get, and mess up the runtime pm usage order. Swap the order of work sheduling and calling autopm get to solve this. Cc: stable Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") Reported-by: Konrad Dybcio Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com Reported-by: Alan Stern Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6bb6e92cb0a4..08562711dcf2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1359,11 +1359,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (type == HUB_RESUME && hub_is_superspeed(hub->hdev)) { /* give usb3 downstream links training time after hub resume */ + usb_autopm_get_interface_no_resume( + to_usb_interface(hub->intfdev)); + INIT_DELAYED_WORK(&hub->init_work, hub_post_resume); queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(USB_SS_PORT_U0_WAKE_TIME)); - usb_autopm_get_interface_no_resume( - to_usb_interface(hub->intfdev)); return; } @@ -1417,6 +1418,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) /* Stop hub_wq and related activity */ timer_delete_sync(&hub->irq_urb_retry); + flush_delayed_work(&hub->init_work); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); From 80e08394377559ed5a2ccadd861e62d24b826911 Mon Sep 17 00:00:00 2001 From: SCHNEIDER Johannes Date: Wed, 25 Jun 2025 07:49:16 +0000 Subject: [PATCH 16/21] usb: dwc3: gadget: Fix TRB reclaim logic for short transfers and ZLPs Commit 96c7bf8f6b3e ("usb: dwc3: gadget: Cleanup SG handling") updated the TRB reclaim path to use the TRB CHN (Chain) bit to determine whether a TRB was part of a chain. However, this inadvertently changed the behavior of reclaiming the final TRB in some scatter-gather or short transfer cases. In particular, if the final TRB did not have the CHN bit set, the cleanup path could incorrectly skip clearing the HWO (Hardware Own) bit, leaving stale TRBs in the ring. This resulted in broken data transfer completions in userspace, notably for MTP over FunctionFS. Fix this by unconditionally clearing the HWO bit during TRB reclaim, regardless of the CHN bit state. This restores correct behavior especially for transfers that require ZLPs or end on non-CHN TRBs. Fixes: 61440628a4ff ("usb: dwc3: gadget: Cleanup SG handling") Signed-off-by: Johannes Schneider Acked-by: Thinh Nguyen Cc: stable Link: https://lore.kernel.org/r/AM8PR06MB7521A29A8863C838B54987B6BC7BA@AM8PR06MB7521.eurprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index b6b63b530148..74968f93d4a3 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3516,7 +3516,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, * We're going to do that here to avoid problems of HW trying * to use bogus TRBs for transfers. */ - if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO)) + if (trb->ctrl & DWC3_TRB_CTRL_HWO) trb->ctrl &= ~DWC3_TRB_CTRL_HWO; /* From cbc889ab0122366f6cdbe3c28d477c683ebcebc2 Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Fri, 27 Jun 2025 17:41:19 +0300 Subject: [PATCH 17/21] usb: xhci: quirk for data loss in ISOC transfers During the High-Speed Isochronous Audio transfers, xHCI controller on certain AMD platforms experiences momentary data loss. This results in Missed Service Errors (MSE) being generated by the xHCI. The root cause of the MSE is attributed to the ISOC OUT endpoint being omitted from scheduling. This can happen when an IN endpoint with a 64ms service interval either is pre-scheduled prior to the ISOC OUT endpoint or the interval of the ISOC OUT endpoint is shorter than that of the IN endpoint. Consequently, the OUT service is neglected when an IN endpoint with a service interval exceeding 32ms is scheduled concurrently (every 64ms in this scenario). This issue is particularly seen on certain older AMD platforms. To mitigate this problem, it is recommended to adjust the service interval of the IN endpoint to not exceed 32ms (interval 8). This adjustment ensures that the OUT endpoint will not be bypassed, even if a smaller interval value is utilized. Cc: stable Signed-off-by: Raju Rangoju Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250627144127.3889714-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 4 ++++ drivers/usb/host/xhci-pci.c | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 30 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bd745a0f2f78..6680afa4f596 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1449,6 +1449,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Periodic endpoint bInterval limit quirk */ if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) { + if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) && + interval >= 9) { + interval = 8; + } if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) && udev->speed >= USB_SPEED_HIGH && interval >= 7) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 0c481cbc8f08..00fac8b233d2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -71,12 +71,22 @@ #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI 0x13ed +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI 0x13ee +#define PCI_DEVICE_ID_AMD_STARSHIP_XHCI 0x148c +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI 0x15d4 +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI 0x15d5 +#define PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI 0x15e0 +#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1 +#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc +#define PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI 0x7316 + #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 @@ -280,6 +290,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_STARSHIP_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN2_XHCI)) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + + if (pdev->vendor == PCI_VENDOR_ID_ATI && + pdev->device == PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index fa1ea0e0c7fb..a20f4e7cd43a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1643,6 +1643,7 @@ struct xhci_hcd { #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) #define XHCI_ETRON_HOST BIT_ULL(49) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) unsigned int num_active_eps; unsigned int limit_active_eps; From cd65ee81240e8bc3c3119b46db7f60c80864b90b Mon Sep 17 00:00:00 2001 From: Hongyu Xie Date: Fri, 27 Jun 2025 17:41:20 +0300 Subject: [PATCH 18/21] xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS Disable stream for platform xHC controller with broken stream. Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable") Cc: stable Signed-off-by: Hongyu Xie Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250627144127.3889714-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 6dab142e7278..c79d5ed48a08 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -328,7 +328,8 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s } usb3_hcd = xhci_get_usb3_hcd(xhci); - if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) usb3_hcd->can_do_streams = 1; if (xhci->shared_hcd) { From 2b857d69a5e116150639a0c6c39c86cc329939ee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C5=81ukasz=20Bartosik?= Date: Fri, 27 Jun 2025 17:41:21 +0300 Subject: [PATCH 19/21] xhci: dbctty: disable ECHO flag by default MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When /dev/ttyDBC0 device is created then by default ECHO flag is set for the terminal device. However if data arrives from a peer before application using /dev/ttyDBC0 applies its set of terminal flags then the arriving data will be echoed which might not be desired behavior. Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable Signed-off-by: Łukasz Bartosik Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/stable/20250610111802.18742-1-ukaszb%40chromium.org Link: https://lore.kernel.org/r/20250627144127.3889714-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgtty.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index 60ed753c85bb..d894081d8d15 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -617,6 +617,7 @@ int dbc_tty_init(void) dbc_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; dbc_tty_driver->subtype = SERIAL_TYPE_NORMAL; dbc_tty_driver->init_termios = tty_std_termios; + dbc_tty_driver->init_termios.c_lflag &= ~ECHO; dbc_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; dbc_tty_driver->init_termios.c_ispeed = 9600; From efe3e3ae5a66cb38ef29c909e951b4039044bae9 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 27 Jun 2025 17:41:22 +0300 Subject: [PATCH 20/21] xhci: dbc: Flush queued requests before stopping dbc Flush dbc requests when dbc is stopped and transfer rings are freed. Failure to flush them lead to leaking memory and dbc completing odd requests after resuming from suspend, leading to error messages such as: [ 95.344392] xhci_hcd 0000:00:0d.0: no matched request Cc: stable Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20250627144127.3889714-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgcap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 0d4ce5734165..06a2edb9e86e 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -652,6 +652,10 @@ static void xhci_dbc_stop(struct xhci_dbc *dbc) case DS_DISABLED: return; case DS_CONFIGURED: + spin_lock(&dbc->lock); + xhci_dbc_flush_requests(dbc); + spin_unlock(&dbc->lock); + if (dbc->driver->disconnect) dbc->driver->disconnect(dbc); break; From 9bd9c8026341f75f25c53104eb7e656e357ca1a2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 27 Jun 2025 19:43:48 +0300 Subject: [PATCH 21/21] usb: hub: Fix flushing of delayed work used for post resume purposes Delayed work that prevents USB3 hubs from runtime-suspending too early needed to be flushed in hub_quiesce() to resolve issues detected on QC SC8280XP CRD board during suspend resume testing. This flushing did however trigger new issues on Raspberry Pi 3B+, which doesn't have USB3 ports, and doesn't queue any post resume delayed work. The flushed 'hub->init_work' item is used for several purposes, and is originally initialized with a 'NULL' work function. The work function is also changed on the fly, which may contribute to the issue. Solve this by creating a dedicated delayed work item for post resume work, and flush that delayed work in hub_quiesce() Cc: stable Fixes: a49e1e2e785f ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm") Reported-by: Mark Brown Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk Signed-off-by: Mathias Nyman Tested-by: Konrad Dybcio # SC8280XP CRD Tested-by: Mark Brown Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 21 ++++++++------------- drivers/usb/core/hub.h | 1 + 2 files changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 08562711dcf2..3e1215f7a9a0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1074,12 +1074,11 @@ int usb_remove_device(struct usb_device *udev) enum hub_activation_type { HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */ - HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, HUB_POST_RESUME, + HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, }; static void hub_init_func2(struct work_struct *ws); static void hub_init_func3(struct work_struct *ws); -static void hub_post_resume(struct work_struct *ws); static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) { @@ -1103,12 +1102,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) goto init3; } - if (type == HUB_POST_RESUME) { - usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); - hub_put(hub); - return; - } - hub_get(hub); /* The superspeed hub except for root hub has to use Hub Depth @@ -1362,8 +1355,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) usb_autopm_get_interface_no_resume( to_usb_interface(hub->intfdev)); - INIT_DELAYED_WORK(&hub->init_work, hub_post_resume); - queue_delayed_work(system_power_efficient_wq, &hub->init_work, + queue_delayed_work(system_power_efficient_wq, + &hub->post_resume_work, msecs_to_jiffies(USB_SS_PORT_U0_WAKE_TIME)); return; } @@ -1388,9 +1381,10 @@ static void hub_init_func3(struct work_struct *ws) static void hub_post_resume(struct work_struct *ws) { - struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work); + struct usb_hub *hub = container_of(ws, struct usb_hub, post_resume_work.work); - hub_activate(hub, HUB_POST_RESUME); + usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + hub_put(hub); } enum hub_quiescing_type { @@ -1418,7 +1412,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) /* Stop hub_wq and related activity */ timer_delete_sync(&hub->irq_urb_retry); - flush_delayed_work(&hub->init_work); + flush_delayed_work(&hub->post_resume_work); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); @@ -1977,6 +1971,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) hub->hdev = hdev; INIT_DELAYED_WORK(&hub->leds, led_work); INIT_DELAYED_WORK(&hub->init_work, NULL); + INIT_DELAYED_WORK(&hub->post_resume_work, hub_post_resume); INIT_WORK(&hub->events, hub_event); INIT_LIST_HEAD(&hub->onboard_devs); spin_lock_init(&hub->irq_urb_lock); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index e6ae73f8a95d..9ebc5ef54a32 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -70,6 +70,7 @@ struct usb_hub { u8 indicator[USB_MAXCHILDREN]; struct delayed_work leds; struct delayed_work init_work; + struct delayed_work post_resume_work; struct work_struct events; spinlock_t irq_urb_lock; struct timer_list irq_urb_retry;