microblaze: Add support for little-endian Microblaze

Microblaze little-endian toolchain exports __MICROBLAZEEL__
which is used in the kernel to identify little/big endian.

The most of the changes are in loading values from DTB which
is always big endian.

Little endian platforms are based on new AXI bus which has
impact to early uartlite initialization.

Signed-off-by: Michal Simek <monstr@monstr.eu>

arch/microblaze/kernel/heartbeat.c

@@ -59,7 +59,7 @@ void setup_heartbeat(void)
 	}
 
 	if (gpio) {
-		base_addr = *(int *) of_get_property(gpio, "reg", NULL);
+		base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL));
 		base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
 		printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr);
 

arch/microblaze/kernel/intc.c

@@ -138,12 +138,15 @@ void __init init_IRQ(void)
 	}
 	BUG_ON(!intc);
 
-	intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
+	intc_baseaddr = be32_to_cpup(of_get_property(intc,
+								"reg", NULL));
 	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
-	nr_irq = *(int *) of_get_property(intc, "xlnx,num-intr-inputs", NULL);
+	nr_irq = be32_to_cpup(of_get_property(intc,
+						"xlnx,num-intr-inputs", NULL));
 
 	intr_type =
-		*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
+		be32_to_cpup(of_get_property(intc,
+						"xlnx,kind-of-intr", NULL));
 	if (intr_type >= (1 << (nr_irq + 1)))
 		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 

arch/microblaze/kernel/prom.c

@@ -77,11 +77,12 @@ static int __init early_init_dt_scan_serial(unsigned long node,
 /* find compatible node with uartlite */
 	p = of_get_flat_dt_prop(node, "compatible", &l);
 	if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
-			(strncmp(p, "xlnx,opb-uartlite", 17) != 0))
+			(strncmp(p, "xlnx,opb-uartlite", 17) != 0) &&
+			(strncmp(p, "xlnx,axi-uartlite", 17) != 0))
 		return 0;
 
 	addr = of_get_flat_dt_prop(node, "reg", &l);
-	return *addr; /* return address */
+	return be32_to_cpup(addr); /* return address */
 }
 
 /* this function is looking for early uartlite console - Microblaze specific */
@@ -115,7 +116,7 @@ static int __init early_init_dt_scan_serial_full(unsigned long node,
 
 	addr = *(u32 *)of_get_flat_dt_prop(node, "reg", &l);
 	addr += *(u32 *)of_get_flat_dt_prop(node, "reg-offset", &l);
-	return addr; /* return address */
+	return be32_to_cpu(addr); /* return address */
 }
 
 /* this function is looking for early uartlite console - Microblaze specific */

arch/microblaze/kernel/timer.c

@@ -270,11 +270,11 @@ void __init time_init(void)
 	}
 	BUG_ON(!timer);
 
-	timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
+	timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL));
 	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
-	irq = *(int *) of_get_property(timer, "interrupts", NULL);
-	timer_num =
-		*(int *) of_get_property(timer, "xlnx,one-timer-only", NULL);
+	irq = be32_to_cpup(of_get_property(timer, "interrupts", NULL));
+	timer_num = be32_to_cpup(of_get_property(timer,
+						"xlnx,one-timer-only", NULL));
 	if (timer_num) {
 		eprintk(KERN_EMERG "Please enable two timers in HW\n");
 		BUG();

arch/microblaze/kernel/vmlinux.lds.S

@@ -15,7 +15,11 @@ ENTRY(microblaze_start)
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 
+#ifdef __MICROBLAZEEL__
+jiffies = jiffies_64;
+#else
 jiffies = jiffies_64 + 4;
+#endif
 
 SECTIONS {
 	. = CONFIG_KERNEL_START;